Mechanic 850 PCB Cleaner 850G

The Mechanic 850 PCB Cleaner (850g) is a high-performance industrial cleaning solvent specifically designed for the precision cleaning of Printed Circuit Boards (PCBs). It is widely recognized in the electronics repair industry for its efficiency in removing flux, grease, and oxidation without damaging sensitive components.

Below is the comprehensive product description and technical specifications.

## Product Overview: Mechanic 850 PCB Cleaner

Key Features & Benefits

• Deep Penetration: The low surface tension allows the liquid to flow under Surface Mount Devices (SMDs) and BGA chips to dissolve hidden flux residues.

• Material Compatibility: Safe for use on FR-4 boards, copper traces, and most integrated circuit (IC) packaging.

• Oxidation Removal: Helps in restoring electrical conductivity by removing thin layers of oxidation on solder pads.

• Rapid Drying: Dries within seconds at room temperature, allowing for immediate testing after cleaning.

• Cost-Efficient: The 850g bulk size is designed for high-volume repair shops and industrial production lines.

Safety and Usage Instructions

Warning: While Mechanic 850 is safer than many industrial degreasers, it is still a chemical solvent. Handle with care.

• Ventilation: Use only in well-ventilated areas. Prolonged inhalation of vapors may cause dizziness.

• Skin Protection: It is recommended to wear nitrile gloves. The solvent can strip natural oils from the skin, leading to dryness.

• Storage: Store in a cool, dry place away from direct sunlight and heat sources. Ensure the cap is tightly sealed to prevent evaporation.

• Application Method: Use a soft-bristled anti-static brush or a lint-free cloth dipped in the solution. For best results on stubborn flux, allow the liquid to sit for 10–20 seconds before scrubbing.