2uul the One Jig Fixture

(0) reviews)

₹1349 50% off ₹2700

* General mobile phone maintenance fixture, rotary fixed design, no rebound, fixed firmly

* Prevent clamps from moving during use, special anti-skid pad

* Let the hot air can be discharged more efficiently, add a heat sink to the bottom of the clamp

* Rotary shaft locks the motherboard or IC more efficiently, fixed well without a rebound

* Protect the upper and lower layers of the double-layer motherboard during maintenance

* Suitable for mobile phone motherboards of various sizes and shapes

* Suitable for fixing when cleaning large chips such as CPU and NAND

1. To allow heating, a special anti-skid pad prevents clamps from moving during use.
Let the hot air can be discharged more efficiently. Add a heat sink to the bottom of the clamp.
2. Rotary shaft locks the motherboard or IC more efficiently, Fixed well without a rebound.
3. Fixtures also support IC-type fixtures fixed for the removal of back glue, the clamp is designed
to bear the force of the IC beam, which can hold up the empty parts of the IC well and avoid the
IC breaks when removing black glue.
4. The fixture can be adjusted at different distances from the high, middle, and low levels. It's
necessary to loosen the two screws at the bottom, move the fixing plate to the appropriate gear
position, and then tighten the bottom screws to lock it.
5. Protect the upper and lower layers of the double-layer motherboard during maintenance.
6. Suitable for mobile phone motherboards of various sizes and shapes.
7. Suitable for fixing when cleaning large chips such as CPU and NAND

2uul the One Jig Fixture

2UUL THE ONE JIG FIXTURE 3

Weight	0.550

Comments

Related products