JTX FS-16 0.1MM ULTRA THIN (5PCS) DESOLDERING WICK

The JTX FS-16 0.1mm Ultra Thin Desoldering Wick is a high-precision tool designed specifically for micro-soldering and delicate electronics repair. Its primary advantage is its extreme thinness, allowing technicians to clear solder from incredibly tight spaces where standard braids would be too bulky.

Here is the detailed product description and technical breakdown.

• Temperature Control: Set your soldering iron between 330°C and 350°C. Because the wick is ultra-thin, it doesn't require "cranking up" the heat like thicker braids do.

• Avoid Friction: Do not scrub the PCB. Place the wick on the solder, place the iron on the wick, and let the capillary action do the work.

• Trimming: Always trim the used (silvery) portion of the wick with sharp nippers before starting a new joint to ensure maximum suction.

Note: Due to the 0.1mm thickness, this wick is delicate. Ensure you are using a clean, tinned iron tip to maintain proper thermal bridge during the desoldering process.