2UUL WL-2015 DESOLDER WIRE

(0) reviews)

₹148 41% off ₹250

* Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick.

* The solder will be absorbed. Remove the desoldering wick after the solder has been absorbed.

* Cut off the used section of the wick using nippers.

* Our thin and soft desoldering wire flat braid has efficient thermal transmission.

* Removes solder faster with better heat response than previous wicks.

* Recommended for lead-free solder with the high heating load.

* RMA base flux. High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux.

* Can be used for precision PCBs safely.

DESCRIPTION :

2UUL WL-2015 DESOLDER WIRE, 2UUL Disc Type Desoldering Braid Wire Braid Solder Remover Wick Wire For Mobile Phone Repair Welding Tin Absorbing Wire Cleaning Residue BGA Stencil.

Feature:

Quickly removes unwanted solder when used with a soldering iron.
Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.
Do not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.
Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB. Different Size for choose.

PACKAGE CONTAINS :

2UUL WL-2015 DESOLDER WIRE 1

2UUL WL-2015 DESOLDER WIRE 2

2UUL WL-2015 DESOLDER WIRE 3

Weight	0.050

Comments

Related products